Welcome to the Cake Decorators Q&A
Golf Bag Cake Sizing
I am wanting to reduce the size from Paul’s bag of 5 inches x 20inches to 3 inches x 12 inches but getting confused as to whether his 5×20 inches was the size of the cake OR the size of his stand?
I’m new to the site and would welcome any advice as to what dimensions the stand would need to be and what size round cake tin I would need to use?
I am wanting to reduce the size from Paul’s bag of 5 inches x 20inches to 3 inches x 12 inches but getting confused as to whether his 5×20 inches was the size of the cake OR the size of his stand?
I’m new to the site and would welcome any advice as to what dimensions the stand would need to be and what size round cake tin I would need to use?
Hi Joanne,
I can see that Paul uses 8 x 6″ Round cakes and the template board is cut from 3.5″ x 20″ (9cm x 50cm) of MDF wood.
To help me understand, can you let me know where you see Paul’s bag being 5″ x 20″. My thought might be that the 6″ cakes are carved to around 5″ and the depth of his cakes would be around 2.5″ deep. However, it would be better clarified.
The key things to change would certainly be the numbers at the very top. If you are going for 60% of what Paul has created I would suggest: 5 x 4″ Round cakes and a board template of 2.5″ x 12″. That way you have a little extra that you can carve or cut away.
Hi David. Thanks for your response. Paul refers to the width of the golf bag being a quarter of the length and then mentioned 5x20inch dimensions.
I think I will proceed with your recommendation of the board template being 2.5×12 inches and 4 inch tins which could then equate to the 3 x 12 inches cake.
Many thanks for your advice.
